ECOCUT 628 SF
Neat Cutting Oil for Gear Hobbing, Cutting and Shaping
Description
ECOCUT 628 SF is a low-misting neat cutting oil, based on a high grade solvent raffinate which contains a combination of EP additives and polar lubricity improvers which enable it to provide superior performance on ferrous and non-ferrous metals.
The use of a special base oil and carefully selected combination of additives in ECOCUT 628 SF reduces oil mist in comparison to conventional cutting oils.
Application
ECOCUT 628 SF is high performance oil for the machining of difficult to machine materials.
It is recommended for operations like gear hobbing, milling, thread rolling, broaching, machining etc.
It is specially designed for very critical spline broaching and can be used for Non-ferrous materials.
Benefits
• Low misting product which leads to better hygiene, workshop cleanliness and consistency of product
• Synergistic blend of Lubricity and Extreme Pressure additives which offer enhanced Tool Life
• Optimized lubricity offers excellent Surface Finish
• Suitable for a variety of Ferrous and Non- Ferrous metals
Storage
Under proper sealed condition at ambient temperature, shelf life is 3 years.
Typical Characteristics
Properties | Typical Value | Test Method |
Appearance | Dark Brown Clear Liquid |
Visual |
Density at 29.5?C, g/ml | 0.97 | ASTM D 4052 |
Viscosity @ 40 deg.C, cSt | 30 | ASTM D 445 |
Flash Point, deg.C | > 160 | ASTM D 92 |
Neutralisation Number, mg KOH/g | 0.5 | ASTM D 974 |
Copper strip corrosion rating, degree | 1 | ASTM D 130 |
Four Ball Weld Load, kg | 500 | ASTM D 2783 |